Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Control Units 
100-91026
PuraLev® Driver System PLD-i30SU.3 (Stand-Alone)
$2,165.45
*incl. packaging (Taxes and shipping calculated at check-out)Consists of:
Estimated Shipping Time: 6 weeks
Delivery from Switzerland
Max. Flow (l/min)
7.7
Max. diff. Pressure (bar)
1
Max. Viscosity
40 cP
Max. Liquid Temperature
60°C / 140°F
Service/ Control Interface
Button Control Mode
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.
Specifications
| Max. Flow (l/min) | 7.7 |
|---|---|
| Max. diff. Pressure (bar) | 1 |
| Max. Viscosity | 40 cP |
| Mounting Type | Bayonet type with locking pin |
| Sterilization Methods | Gamma radiation up to 40 kGy |
| Fitting Size | 3/8" |
| Fitting Type | Barb |
| Impeller Material | Polypropylene |
| Sealing Ring | Infrared welding |
| Wet Volume | 7.7 ml |
| Wet Surface | 55.9 cm² |
| Max. Liquid Temperature | 60°C / 140°F |
| Motor/Driver Coating | Epoxy |
| Ex Protection | Other |
| Power | 35 W |
| Voltage | 24 VDC |
| PLC Interface | 1 analog input ("Flow", "Speed") 4-20 mA 1 digital input ("Enable") 0-24 V (optocoupler) 1 digital output ("Status") 0-24 V (relays) |
| Service/ Control Interface | Button Control Mode |
| Housing/Material | Polypropylene |
Downloads
System Configuration
