Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Control Units 
800-91097
TFF Application System PCS-i100SU.2
$50.00
*incl. packaging (Taxes and shipping calculated at check-out)Consists of:
- Integrated Pump Driver IPD-100.3-03-02 SU
- Single-Use Sensor LFS-06SU-Z
- Clamp-On Sensor LFSC-i10X-001
- PuraLev® Console LCO-i100.1-01
- Desktop AC/DC Power Supply GST160A24-R7B IC915
- Pump Head Socket PHS-i100.1
- Single-Use Pump Head DCP-200.3-G25
- LeviFlow Mounting Bracket LMK-1.2
- LeviFlow Interconnect Cable LFI-C.1-30
- IP Adaptor Cable Hybrid ICH-1.2-30
- AC Mains Cable AMC-1.1
Estimated Shipping Time: 6 weeks
Delivery from Switzerland
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2
Max. Liquid Temperature
60°C / 140°F
Tangential Flow Filtration (TFF) is a crucial step in biopharmaceutical manufacturing that requires the highest possible protein yield. Conventional pump systems such as peristaltic or 4-piston diaphragm pumps cause protein degradation due to mechanically induced shear of valves and tube compression. Furthermore, such systems generate a pulsating flow, resulting in non-optimal filter performance and reduced flux.
Specifications
| Flow Range Sensor (l/min) | Inline Sensor: 1.75 - 8 (Accuracy of +/-1 %); Clamp-on Sensor: 0 - 4 (Accuracy of +/- 1.5 %) |
|---|---|
| Max. Flow (l/min) | 21 |
| Max. Viscosity | 20 cP |
| Max. diff. Pressure (bar) | 2 |
| Fitting Size | Pump Head: 1/2"; Inline Sensor: 3/8"; Clamp-on Sensor: 1/4" x 3/8" (ID x OD) |
| Fitting Type | Pump Head: Barb; Inline Sensor: Triclamp; Clamp-on Sensor: Tube |
| Housing/Material | Polypropylene |
| Impeller Material | Polypropylene |
| Sealing Ring | Infrared welding |
| Mounting Type | Bayonet type with locking pin (Pump Head Socket) |
| Sterilization Methods | Pump Head: Gamma radiation up to 40 kGy |
| Max. Liquid Temperature | 60°C / 140°F |
| Wet Volume | Pump Head: 24 ml |
| Wet Surface | Pump Head: 150 cm² |
| Motor/Driver Coating | Epoxy |
| Connector Type | circular connector |
| Cable Lenght (mm) | 300 |
| Cable Jacket | PVC |
| Ex Protection | Other |
| Power | Console: 50 W or 160 W; Driver: 110 W |
| Voltage | Console: 24 VDC; Driver: 24 VDC |
| PLC Interface | Console: Multi-touch screen 7”, 3 pressure sensors, 2 flow sensors, 1 temp. Sensor PLC (2 digital in/outputs, 1 analog in/output), LAN, USB Driver: up to 4 digital inputs 0 – 24 V (optocoupler) up to 2 analog inputs 0 – 10 V up to 2 analog inputs 4 – 20 mA up to 4 digital outputs 0 – 24 V (relay) |
| Service/ Control Interface | RS485 with Modbus protocol and PLC Interface |
| Housing/Material | Anodized Aluminum |