Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Control Units 
900-91098
Transfer Application System PCS-i30SU.1
$60.00
*incl. packaging (Taxes and shipping calculated at check-out)Consists of:
- Integrated Pump Driver IPD-30.8-03-02 SU
- Clamp-On Sensor LFSC-i10X-001
- PuraLev® Console LCO-i100.1-01
- Desktop AC/DC Power Supply VEC50US24 IC915
- Pump Head Socket PHS-i30.1
- Single-Use Pump Head DCP-30.2
- IP Adaptor Cable Hybrid ICH-1.2-30
- AC Mains Cable AMC-1.1
- Pressure Sensor Adaptor Cable LPE-1.1-30
- Pendotech Single-Use Pressure Sensor PREPS-N-038
- IP Cable Signal 4 Wires ICS-3.1-30
Estimated Shipping Time: 6 weeks
Delivery from Switzerland
Max. Flow (l/min)
7.7
Max. diff. Pressure (bar)
1
Max. Liquid Temperature
60°C / 140°F
Time is a critical parameter in today’s bioprocessing applications. Transfer processes such as buff er or media preparation require a pump system that can handle liquid at the highest speed. Conventional pump systems such as peristaltic or 4-piston diaphragm pumps generate a pulsating flow leading to a slow and periodic discharge of liquid. Additionally, these systems bear the risk of a catastrophic tube rupture due to a possible pressure build up.
Specifications
| Flow Range Sensor (l/min) | Clamp-on Sensor: 0 - 4 (Accuracy of +/- 1.5 %) |
|---|---|
| Max. Flow (l/min) | 7.7 |
| Max. Viscosity | 40 cP |
| Max. diff. Pressure (bar) | 1 |
| Fitting Size | Pump Head: 3/8"; Clamp-on Sensor: 1/4" x 3/8" (ID x OD) |
| Fitting Type | Pump Head: Barb; Clamp-on Sensor: Tube |
| Housing/Material | Polypropylene |
| Impeller Material | Polypropylene |
| Sealing Ring | Infrared welding |
| Mounting Type | Bayonet type with locking pin (Pump Head Socket) |
| Sterilization Methods | Pump Head: Gamma radiation up to 40 kGy |
| Max. Liquid Temperature | 60°C / 140°F |
| Wet Volume | Pump Head: 7.7 ml |
| Wet Surface | Pump Head: 55.9 cm² |
| Motor/Driver Coating | Epoxy |
| Connector Type | circular connector |
| Cable Lenght (mm) | 300 |
| Cable Jacket | PVC |
| Ex Protection | Other |
| Power | Console: 50 W or 160 W; Driver: 40 W |
| Voltage | Console: 24 VDC; Driver: 24 VDC |
| PLC Interface | Console: Multi-touch screen 7”, 3 pressure sensors, 2 flow sensors, 1 temp. Sensor PLC (2 digital in/outputs, 1 analog in/output), LAN, USB Driver: up to 4 digital inputs 0 – 24 V (optocoupler) up to 2 analog inputs 0 – 10 V up to 2 analog inputs 4 – 20 mA up to 4 digital outputs 0 – 24 V (relay) |
| Service/ Control Interface | RS485 with Modbus protocol and PLC Interface |
| Housing/Material | Anodized Aluminum |