Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Control Units 
100-91511
PuraLev® Driver System PLD-i100SU.5 (ATEX/IECEx, OEM Model)
$3,318.90
*incl. packaging (Taxes and shipping calculated at check-out)Consists of:
Estimated Shipping Time: 6 weeks
Delivery from Switzerland
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2
Max. Viscosity
20 cP
Max. Liquid Temperature
60°C / 140°F
Service/ Control Interface
RS485 with Modbus protocol and PLC Interface
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.
Specifications
| Max. Flow (l/min) | 21 |
|---|---|
| Max. diff. Pressure (bar) | 2 |
| Max. Viscosity | 20 cP |
| Mounting Type | Bayonet type with locking pin |
| Sterilization Methods | Gamma radiation up to 40 kGy |
| Fitting Size | 1/2” |
| Fitting Type | Triclamp |
| Impeller Material | Polypropylene |
| Sealing Ring | Infrared welding |
| Wet Volume | 25 ml |
| Wet Surface | 150 cm² |
| Max. Liquid Temperature | 60°C / 140°F |
| Motor/Driver Coating | ETFE |
| Connector Type | Open Wires |
| Cable Lenght (mm) | 5 000 |
| Cable Jacket | PVC |
| Ex Protection | ATEX/IECEx |
| Power | 110 W |
| Voltage | 24 VDC |
| PLC Interface | 1 analog output 0 - 10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain) |
| Service/ Control Interface | RS485 with Modbus protocol and PLC Interface |
| Housing/Material | Polypropylene |
Downloads
System Configuration
